Difference between revisions of "TS6090 TwenSpace laser cutter"

From

Jump to: navigation, search
 
(28 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
|Skillz=Electronics, firmwere
 
|Skillz=Electronics, firmwere
 
}}
 
}}
I bought a TS6090 100W laser cutter made bij Merknaam:JIN ZHI YIN. As you would expect with a cheap china lasercutter the controlling hardware (and software) is a bit crappy.
+
=This page is no longer maintained, go to site of [http://daveborghuis.nl/wp/ts6090-laser-cutter/ daveborghuis.nl] to see the latest updates.=
 +
 
 +
I bought a TS6090 80W laser cutter made with brandname "JIN ZHI YIN". As you would expect with a cheap china laser cutter the controlling hardware (and software) is a bit crappy. I make the changes as mentioned here so I can use this lasercutter for my own [https://twenspace.nl/wp/apparatuur/lasercutter/ makerspace]
 +
 
 +
= TS6090 =
 +
Specifications (in short)
 +
* Bed size 60x90 cm
 +
* 80 Watt laser tube
 +
* Flow sensor (connected to power supply)
 +
* Lihuiyu M2 Nano controller (with Coreldraw plugin and USB protection)
  
 
[[File:Lihuiyu_m2-nano.jpg|250px|Controller board of TS6090, Lihuiyu M2 Nano]]
 
[[File:Lihuiyu_m2-nano.jpg|250px|Controller board of TS6090, Lihuiyu M2 Nano]]
  
Current controller is a Lihuiyu M2 Nano, used in many cheap chinese lasers.
+
So I want to upgrade the 'brains' of the machine with a MKS board (clone of [http://smoothieware.org/smoothieboard smoothieboard]).  TkkrLab have already modified another [[Laser_Cutter|lasercutter]] that works well with all the modifications, so I want to change this laser to the same software.
  
So I want to upgrade the 'brains' of the machine with a MKS board (clone of [http://smoothieware.org/smoothieboard smoothieboard]). You need the folling parts (prices are indication of cost, no shipping, tax etc.)
+
=Hardware Modifycations=
 +
== Needed parts ==
 +
Prices are indication of cost, no shipping, tax etc.
 
* [https://www.aliexpress.com/item/3D-Printer-Smoothieware-Controller-MKS-SBASE-V1-3-Opensource-32bit-Smoothieboard-Arm-Support-Ethernet-Preinstalled-Heatsinks/32863382970.html MKS board] ($45.59)  
 
* [https://www.aliexpress.com/item/3D-Printer-Smoothieware-Controller-MKS-SBASE-V1-3-Opensource-32bit-Smoothieboard-Arm-Support-Ethernet-Preinstalled-Heatsinks/32863382970.html MKS board] ($45.59)  
 
* [https://www.aliexpress.com/item/128-64-DOTS-LCD-module-5V-blue-screen-12864-LCD-with-backlight-ST7920-Parallel-port-LCD12864/32716038745.html LCD screen] ($4.80) The package deals with touch screens doesn't work in these configs.
 
* [https://www.aliexpress.com/item/128-64-DOTS-LCD-module-5V-blue-screen-12864-LCD-with-backlight-ST7920-Parallel-port-LCD12864/32716038745.html LCD screen] ($4.80) The package deals with touch screens doesn't work in these configs.
 
* [https://www.aliexpress.com/item/Rotary-Encoder-code-Switch-EC11-Digital-Potentiometer-with-Switch-5Pin-Handle-Length-20mm/32587006925.html Rotary encoder] ($1.28 ) for menu control.
 
* [https://www.aliexpress.com/item/Rotary-Encoder-code-Switch-EC11-Digital-Potentiometer-with-Switch-5Pin-Handle-Length-20mm/32587006925.html Rotary encoder] ($1.28 ) for menu control.
 +
===Small electronic parts===
 +
* For power controller
 +
** 2 Optocouplers $0.50 a piece and
 +
** 2 x 100R
 +
** 2 x 500R
 +
** 6 female pin header for the power controller
 +
* 2 x JST 2 pin for the endstops
 +
 +
Additional general info
 +
* See also [http://smoothieware.org/laser-cutter-guide Smoothie board laser cutter guide]
 +
* [https://www.youtube.com/watch?v=e1c3keOKL6Y Mirror alignment]
 +
 +
==Before==
 +
[[File:TS6090 Lihuiyu M2 Nano.JPG|250px]]
 +
 +
=Changes=
 +
* XY Stops was 1 connector (white bottom on before photo), changed this to two separate JST 2 pin connectors. Use a multimeter to see how the connections are.
 +
* Power for the board, we only need 24V. Smoothieboard has screw terminal, just screw on the cables (was 24+5 volt for Lihuiyu board)
 +
* Smoothie use the same connectors for XY steppers, so just plug in.
 +
* Added switch between water sensor to disable laser when door open. The pin is labeled with "WP" (Water Protect).
 +
 +
[[File:TS6090 door switch.JPG|250px|thumb|Added open door switch sensor to the WP pin]]
 +
 +
==Laser control==
 +
Power control was done manually with a seperate control (bottom left on before photo, that has to be done from smoothieboard. For this we create a small print inspired on our experience with the [https://tkkrlab.nl/projects/git-tkkrlaser/ TkkrLab lasercutter].
 +
 +
Remove the original analog display (unscrew bolts) and button interface (you can control it by software, so not REALLY needed). Later you can replace this with a nice LCD display & Rotary Encoder. The connector of this  original analog display is connected to laser controller and smoothieboard J8 (near SD card).
 +
  
 +
==Camera==
 +
I use [https://lightburnsoftware.com Lightburn] for controlling the laser, this has a camera option.
 +
* 8MP camera with viewing angle of 85°,  bought via [http://s.click.aliexpress.com/e/6HCBgNw Aliexpress] and USB extension cord.
 +
* Camera mount via [https://www.thingiverse.com/thing:3485381 thingiverse].
  
 +
==After==
 +
[[File:TS6090 smoothie board.JPG|250px]]
  
TODO:
+
=Software=
* Place MKS in lasercutter, done make documentation and finetune the MKS confg.ini setting.
+
First update the current firmware with the latest. All left to do is to make a good 'config' text file with all the settings.
* make nice plate for LCD and rotary encoder
+
Download here my [[:File:TS6090 MKS.zip|config and firmware]]
* replace legs of laser cutter, they are really flimsy. Plan is to make a cabinet to put the laer on.
+

Latest revision as of 22:49, 10 December 2019

Project: TS6090 Laser cutter
TS6090 TwenSpace laser cutter Picture.jpg
Name TS6090 Laser cutter
Initiator Zeno4ever
Status {{{Status}}}
Skills Electronics, firmwere
Summary {{{Summary}}}

This page is no longer maintained, go to site of daveborghuis.nl to see the latest updates.

I bought a TS6090 80W laser cutter made with brandname "JIN ZHI YIN". As you would expect with a cheap china laser cutter the controlling hardware (and software) is a bit crappy. I make the changes as mentioned here so I can use this lasercutter for my own makerspace

TS6090

Specifications (in short)

  • Bed size 60x90 cm
  • 80 Watt laser tube
  • Flow sensor (connected to power supply)
  • Lihuiyu M2 Nano controller (with Coreldraw plugin and USB protection)

Controller board of TS6090, Lihuiyu M2 Nano

So I want to upgrade the 'brains' of the machine with a MKS board (clone of smoothieboard). TkkrLab have already modified another lasercutter that works well with all the modifications, so I want to change this laser to the same software.

Hardware Modifycations

Needed parts

Prices are indication of cost, no shipping, tax etc.

Small electronic parts

  • For power controller
    • 2 Optocouplers $0.50 a piece and
    • 2 x 100R
    • 2 x 500R
    • 6 female pin header for the power controller
  • 2 x JST 2 pin for the endstops

Additional general info

Before

TS6090 Lihuiyu M2 Nano.JPG

Changes

  • XY Stops was 1 connector (white bottom on before photo), changed this to two separate JST 2 pin connectors. Use a multimeter to see how the connections are.
  • Power for the board, we only need 24V. Smoothieboard has screw terminal, just screw on the cables (was 24+5 volt for Lihuiyu board)
  • Smoothie use the same connectors for XY steppers, so just plug in.
  • Added switch between water sensor to disable laser when door open. The pin is labeled with "WP" (Water Protect).
Added open door switch sensor to the WP pin

Laser control

Power control was done manually with a seperate control (bottom left on before photo, that has to be done from smoothieboard. For this we create a small print inspired on our experience with the TkkrLab lasercutter.

Remove the original analog display (unscrew bolts) and button interface (you can control it by software, so not REALLY needed). Later you can replace this with a nice LCD display & Rotary Encoder. The connector of this original analog display is connected to laser controller and smoothieboard J8 (near SD card).


Camera

I use Lightburn for controlling the laser, this has a camera option.

  • 8MP camera with viewing angle of 85°, bought via Aliexpress and USB extension cord.
  • Camera mount via thingiverse.

After

TS6090 smoothie board.JPG

Software

First update the current firmware with the latest. All left to do is to make a good 'config' text file with all the settings. Download here my config and firmware